One full coin cell battery charge typically lasts between 08:00h and 15:00 h of continuous recording.
Note that these numbers refer to the recommended rechargeable coin cell batteries. Technical specifications can be found here.
For measurements that are stored on the onboard memory, typically the memory is the limiting factor over the battery charge level.
The overall coin cell battery runtime depends on the selected operation mode, the sampling frequency and the sensor channels that are included in the measurement. Angular rate readings from the inertial measurement unit consume the most power so they should be excluded if not required and if total runtime is a priority goal.
Visit the OpenGo App site to learn more about the settings.
LINK <>
Learn more about quiesence power consumption when sensor insoles remain unused.
